Rain Bird ESP-TM2 Series Controller – WiFi Capable

The ESP-TM2 irrigation controller is the perfect option for essential residential solutions. Building upon Rain Bird’s legacy of The Intelligent Use of Water®, this controller offers simple water-saving features that you will use. With the flexibility of 3 programs and four start times available per program, you can tailor your watering schedule to your landscape’s needs. The ESP-TM2 provides the Extra Simple Programming interface you are familiar with in a controller built to last! Make your controller SMART by adding the LNK WiFi module and a Rain Bird Rain Sensor. Best of all, you can upgrade the ESP-TM2 into a WiFi-enabled controller by simply installing a new LNK WiFi Module without having to replace the entire unit. Make your controller SMART with EPA WaterSense certification by adding the LNK WiFi module and a WR2 rain sensor. Features Quick to Install Available in 4, 6, 8, and 12 station models Suitable for indoor or outdoor installations Factory-installed outdoor-rated power cord for your convenience (Australian 230v models only) Simple to Program Quickly program a schedule in just three steps Three available programs (A, B, C) with up to 4 start times for each program Simple one-touch manual watering NEW large back-lit LCD for improved visibility in low-light and direct sunlight conditions WiFi Connectivity By simply plugging in a Rain Bird LNK WiFi Module (sold separately), users can access, operate and monitor their irrigation system from anywhere. Internet-based weather info makes daily adjustments to the irrigation schedule. Save up to 30% water. For support and help with the LNK WiFi and Rain Bird Mobile App, please visit http://wifi-pro.rainbird.com/support/. Advanced Features Contractor Default™ allows you to save and restore your custom schedule quickly. Delay Watering up to 14 days and automatically resume watering after the set delay has elapsed Bypass Rain Sensor for any station gives you the ability to customise which stations react to a rain sensor. Set Permanent Days Off per program to ensure watering never occurs on days when maintenance crews are on-site (for Odd/Even/ Cyclic schedules) Seasonal Adjust by the program allows you to reduce or increase watering by the program quickly. Specs Controller Hardware Plastic wall-mount cabinet with door Mounting screws with anchor shields Factory-installed pigtail Australian/New Zealand plug 230v 1.8m cord Controller Features Familiar, easy to navigate user interface Rain sensor input with bypass capability Master valve/pump start circuit. Nonvolatile (100 years) storage memory Electronic diagnostic circuit breaker Remote accessory port for Rain Bird approved accessory devices. Scheduling Features Program based scheduling with three individual programs and four independent start times per program for 12 total start times Watering schedule options: Custom Days of the week, ODD or EVEN calendar days, or Cyclic (every 1 – 30 days) Advanced Features Compatible with Rain Bird LNK WiFi Module (sold separately) to enable remote programming, operation and alerts from the Rain Bird mobile app. Manual Watering option for all stations, a single station or an individual program Seasonal Adjust applied to all programs or an individual program Delay Watering up to 14 days (applies only to stations set to obey Rain sensor) Permanent Days Off (for Odd, Even or Cyclic programming) Sensor bypass for all programs or individual stations Adjustable delay between stations Contractor Default™ Program Save and Restore the saved program(s) Master Valve on/off by the station Automatic short detection with station-specific alarm messages Operating Specifications Station timing: 1 minute to 6 hours Seasonal Adjust: 5% to 200% Max operating temperature 230v models 122°F (50°C) Electrical Specifications Input required: 230VAC (±10%) @ 50/60Hz Output: .65A at 24VAC on 230v models Master Valve/Pump Start Relay External battery backup not required. Nonvolatile memory permanently saves the current programming, and a ten-year life lithium battery maintains the controllers time and date during power outages. Dimensions Width: 7.92 in. (20,1 cm) Height: 7.86 in. (20,0 cm) Depth: 3.51 in. (9,0 cm)