3G-SDI Video SFP 1260~1610nm 40km Single Channel Optical Receiver Module
$41.4
$69.97
3G-SDI Digital Video SFP Single-Channel Optical Receiver Module (SMF, 1260~1610nm RX, 40km/-18dBm, LC, DOM, MSA Compliant) Optcore OHP3G-R40DCR is a high-performance, cost-effective 3G-SDI optical receiver module for single-channel video transmission applications over single-mode fiber (SMF). It provides the data rates from 50Mbps to 2.97Gbps and is specifically designed for robust performance in the presence of SDI pathological patterns for SMPTE 259M, SMPTE 344M, SMPTE 292M, and SMPTE 424M serial rates. It provides the maximum transmission distance of 40km over single-mode fiber at 3Gbps pathological signals. The Pin definition of OHP3G-R10DCR is MSA compliant. The OHP3G-R40DCR provides extensive operational status monitoring (also called DDMI) through an I2C interface. Output optical power, bias current, supply voltage, and operating temperature are monitored. If a parameter monitored is outside the pre-defined range, the alarm flag associated with the parameter will be raised. The OHP3G-R40DCR is a Class I Laser product per FDA/CDRH and IEC-60825 standards. Features • SMPTE 297-2006 Compatible Features • Speed from 50 Mbps to 3Gbps • Distance up to 40km for 3G-SDI over Single-mode Fiber • Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI • Single PIN photodetector Receiver • Hot-pluggable SFP • Digital Diagnostic functions available through the I2C interface • Single 3.3V power supply • Low Power Consumption • Operating case temperature: 0 to 70°C • RoHS compliant and Lead-Free General Specification Product Series 3G-SDI Video SFP Transceiver Part Number OHP3G-R40DCR Form Factor Video SFP Singel Channel Receiver Data Rate 3 Gb/s Wavelength 1260~1610 nm Fiber Type SMF Max Distance 40 km Optical Components PIN Transmitter Power N/A Extinction ratio N/A Receiver Sensitivity < -18 dBm Receiver Overload > -3 dBm Connector Single LC Digital Diagnostic Monitoring Support as default Environment Operating: 0°C to 70°C Storage: -40°C to 85°C Weight 0.025 kg Application SMPTE 424M (2.97Gb/s) SMPTE 292M (1.485Gb/s) SMPTE 259M (270/360Mb/s) High-density Video Router Broadcast cameras Gigabit Ethernet,OC-48 and 2x Fiber Channel Standards Reference INF-8074i SFP (Small Formfactor Pluggable) Transceiver SFF-8472 Diagnostic Monitoring Interface for Transceiver SMPTE 259M-2008 SDTV Digital Signal/Data Serial Digital Interface (SD-SDI) SMPTE 292M-2008 1.5 Gbps Signal/Data Serial Interface (HD-SDI) SMPTE 344M-2000 540 Mbps Serial Digital Interface SMPTE 424M-2006 3Gbps Signal/Data Serial Interface (3G-SDI) Receiver Specification Parameter Symbol Min. Typ. Max. Units Optical Sensitivity for SMPTE-424M 2.97Gb/s Sen – – -20 dBm Sensitivity for SMPTE-292M 1.485Gb/s Sen – – -21 dBm Maximum Input Power(Saturation) PMAX -3 – – dBm Signal Detect — Asserted Pa – – -21 dBm Signal Detect — Deasserted Pd -35 – – dBm Signal Detect — Hysteresis Phys 1 – 4 dB Wavelength of Operation λ 1260 – 1610 nm Electrical Differential Output Voltage VIL –VCC 0.4 – 2 V Signal Detect Output Voltage– Low VSIL –VCC – – 0.8 V Signal Detect Output Voltage– High VSIH –VCC 2.0 – – V Pin Definition Pin No. Name Function 1 VeeT Transmitter Ground 2 TX Fault Transmitter Fault Indication 3 TX Disable Transmitter Disable 4 VeeT Transmitter Ground 5 I2C CLK SCL Serial Clock Signal 6 I2C DATA SDA Serial Data Signal 7 N.C. Not Connected 8 N.C. Not Connected 9 N.C. Not Connected 10 N.C. Not Connected 11 N.C. Not Connected 12 N.C. Not Connected 13 N.C. Not Connected 14 N.C. Not Connected 15 N.C. Not Connected 16 VccT Transmitter Power 17 VeeT Transmitter Ground 18 TD Transmit Data In 19 TD- Inv Transmit Data In 20 VeeT Transmitter Ground Download Spec / Datasheet Note: Specifications and product availability are subject to change without notice. Optcore assumes no responsibility for inaccuracies contained herein.
