Features Versatile Full Flow Ball Valve, Lightweight and Strong Frost Friendly Won't rust or corrode in general or salt water applications Individually Hand Tested using both Air and Water before it leaves the Hansen Factory Manufactured from non Corrosive, UV Stabilised Materials Potable Water Approved (AS/NZS 4020 drinking water test standard) New Zealand Made Overview Hansen's full flow male-female ball valves have been designed for use for use in above or below ground in fluid distribution lines. The Valves are strong, lightweight, compact and provide smooth unrestricted leak free on / off control. The Hansen Full Flow Ball Valve range will function across a wide range of operating pressures and temperatures and can be used anywhere the flow of liquid needs to be stopped or started. High pressure rated to 16 Bar. Removable handles to help differentiate between a range of different applications. Non corrosive, potable water approved and built to last! Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty. Hansen Ball Valves are Frost Friendly and have been tested in frost conditions. Results may vary in freezing conditions. Parts and materials: Body & End Caps - Glass Fibre Reinforced Nylon Handle - Glass Fibre Reinforced Nylon Ball - Polypropylene Ball Seats & Stem - Acetal (POM) O-Rings - Nitrile Rubber
