Overview Solar power eliminates the need for batteries and provides maintenance-free operation by harnessing the sun’s energy or ambient light to fully power the controller 24 hours a day, 7 days a week, for years on end. This “eco-innovations” alternative is more environmentally friendly and saves on battery costs. The solar charger cell is 9.0V 1800mAh and includes 40′ (12 m) of UL-rated 18 AWG (1mm2). The distance from the solar panel to the controller can be extended to 200′ (61 m) using the same wire type or better. After installation, allow the solar panel to charge the solar batteries before programming fully. This typically takes between 4-6 hours in direct sunlight. You can test if the controller has enough programming power by pressing the buttons until the LCD illuminates. PROPER INSTALLATION OF THE SOLAR PANEL ON THE XC HYBRID Connecting the Solar Panel to the XC Hybrid is an easy process that can be done quickly by any installer. To connect the Solar Panel, all you have to do is remove the existing battery pack that comes with the stock XC Hybrid, and replace it with the charging module connected to the Solar Panel. then, place the Solar Panel itself in an area that has a lot of exposure to the sun. Hunter recommends hanging it on an eave, a high fence, or a heavy duty rain gutter. as the Solar Panel’s sole energy source is the sun, it needs to be placed in a spot where it can get plenty of it. When the Solar Panel is initially plugged in, it may require a bit of time in the sun to charge up the controller. this should not take long at all. as long as it receives plenty of sunlight, this eco-conscious innovation should run day after day, year after year with no problems whatsoever.
