16oz Libbey Tumbler Clear Glass with Bamboo Lid UV Sublimation Blank

📖 What to know about the 16oz Libbey Clear (NEW)A great frosted glass tumbler made of the highest quality with a gloss finish for sublimation or can have UV wraps applied easily.  Can be pressed in a mug press if straight and you have the correct sized heating pad, but consistent quality results will come from an oven.NOTICE: Due to the nature of the glass products, most companies will not insure. Shipping does not include insurance.📋 Instructions for 16oz Libbey Clear (NEW)111111111111111111♨️ How to sublimate a 16oz Libbey Clear (NEW)📋 Materials NeededSublimation printer and sublimation inkSublimation paperHeat-resistant tapeMug/Tumbler Press or Oven16oz Libbey Clear (NEW) (Substrate)Oven: Heat ShrinkMug or Tumbler Press: Heating Element to suitHeat gun or hair dryer if using heat shrink🔥 Mug/Tumbler Heat Press SettingsTemperature Min: 180°CTemperature Max: 200°CTime Min: 180 SecondsTime Max: 220 SecondsPressure:Press: Extremely Firm Oven: Heat Shrink(Tip: Different presses vary—start at 190°C for 200 seconds and adjust if needed.)🔥 Oven/Air Frier Heat SettingsTemperature Min: 180°CTemperature Max: 200°CTime Min: 360 SecondsTime Max: 480 SecondsPressure:Press: Extremely Firm Oven: Heat Shrink📝 PreparationFor templates, Mock-ups and image size required, please refer to the Design tab.Print your design, mirror your image.Clean the substrate printing surface using a microfiber cloth or lint brush to remove dust, oils or lint. (As per substrate)Place the printed image face up and align the subatrate to the centre of the print.Secure the edges using heat-resistant tape to prevent movement.🛠️ Mug/Tumbler Heat Press PressingIf this is your first press of the this size substrate or you have changed inserts, make sure you do a pre-check before heated to make sure the pressure is correct. You should think that the substrate is nearly going to break as the correct pressure.Heat the press to required temperature.Position the substrate inside the element.Press at listed Heat Press Settings Above.Rotate and press again at the heat press settings listed.Remove carefully from press after timer has finished. (Caution: Will be extremely hot.)🛠️ Oven/Air Frier BakingHeat the oven to required temperature.Apply heat shrink and heat or apply silicone clamp.Place substrate/s in the oven.Position the substrate inside the oven.Bake at listed Heat Press Settings Above.In some air fryers, you may need to rotate half way through baking due to insufficient air flow.Remove carefully from oven after timer has finished. (Caution: Will be extremely hot.)❄️ Cooling and AssemblyCarefully remove the substrate from the press (it will be hot).Peel off the sublimation paper while the substrate is warm for best results.Allow the substrate to cool completely.Attach lid.Wrap in protective plastic cover and place into packaging.✅ Tips for Best ResultsEnsure full edge-to-edge coverage in your design to avoid white borders (ensure bleed is sufficient).If colours look dull, increase time by 5 seconds or pressure slightly.If the coating looks yellowed, your temperature is too high or time too long.Store substrate in a clean, dry, dust-free area before printing.When taping the seam, tape with high pressure applied to the print ensuring tightness.Do not press with lid or base attached.Trim heat shrink to not have too much excess overhanging, it is hard to remove.📋 16oz Libbey Clear (NEW) Dimensions📏 Product DimensionsLength:14.70 Cm ( /- 5%)Width:7.00 Cm ( /- 5%)Height:7.00 Cm ( /- 5%)Weight:0.26 Kg ( /- 5%)Weight:24.80 Cm ( /- 5%)📦 Shipping DimensionsLength:18.00 Cm ( /- 5%)Width:8.00 Cm ( /- 5%)Height:8.00 Cm ( /- 5%)Weight:0.31 Kg ( /- 5%)📖 Warranty/Returns for the 16oz Libbey Clear (NEW)While the upmost care is taken with handling items, we do not cover the odd minor blemish which will be covered with a darker print. Please visit the link below in regards to returns or exchanges.Warranty/Returns LinkTo find out more about the warranty/returns policy for this item Click Here.📋 16oz Libbey Clear (NEW) FeaturesClear Finish for Sight ✓Bamboo Lid ✓Packaging Box ✓Compatible with Coloured Lids Range ✓Straws, base and heat shrink included ✓📋 16oz Libbey Clear (NEW) Specifications🎨 ColoursPrimaryTransparentSecondaryBrownAdditionalGlass🧱 MaterialsPrimaryGlassSecondaryBamboo📄 Substrate SpecificationsSubstrate ColourSemitransparentSubstrate MaterialGlassSubstrate FinishFrosted👤 Age and UsageAge RangeAdultAdult ProductNo🎬 Videos about 16oz Libbey Clear (NEW)▶️ No Current VideoNo current videos are available for this product. ▶️ Visit our YouTube Channel Subscribe to be notified of new videos as they are released.📋 16oz Libbey Clear (NEW) Design🎨 Print AreasPrint Area 1 Length120.00 mm ( /- 5%)Print Area 1 Width248.00 mm ( /- 5%)👤 Suggested BleedBleed Left0.00 mm ( /- 5%)Bleed Right2.00 mm ( /- 5%)Bleed Top0.00 mm ( /- 5%)Bleed Bottom0.00 mm ( /- 5%)⬇️ Download Design Templates PSD JPG PDF 📋 16oz Libbey Clear (NEW) Includes1 x 16oz Libbey Frosted ✓Chained Products with this Item: